Hello
None of the tasks are running on my install. I have tried to figure out why but without success. I have attached the files as requested in the issue guideline.
I did not change anything in the settings.

CommentFileSizeAuthor
#11 top2.txt2.85 KByazzou
#9 top.txt2.94 KByazzou
#7 done_after_upgrade.txt1.47 KByazzou
#7 debug_octopus_upgrade.txt205.33 KByazzou
#7 debug_barracuda_upgrade.txt183.31 KByazzou
barracuda.cnf_.txt2.07 KByazzou
mesboutiks.octopus.cnf_.txt1.23 KByazzou
barracuda_log.txt20.31 KByazzou
octopus_log.txt2.66 KByazzou

Comments

omega8cc’s picture

omega8cc commented
Component: Aegir Hostmaster » Miscellaneous
Category: Task » Support request
Status: Active » Closed (duplicate)

Duplicate: #2238261: Aegir tasks not running due to incomplete barracuda+octopus upgrade

yazzou’s picture

yazzou commented
Status: Closed (duplicate) » Active

Well i seem to have upgraded successfully after running the required commands and finally received the confirmation email in wich i can read : "Your Aegir Hosting System has been upgraded to version BOA-2.2.3"

I still have all the verify tasks pending for more that half an hour now ! It usually takes much less than that and after upgrades i could see in the previous times tasks running but none of them right now seems to run...

I have first upgraded barracuda and then octopus by typing : 

  $ barracuda up-stable
  $ octopus up-stable all both

The last lines of barracuda and octopus log files : 

Sun Apr 27 10:30:00 CEST 2014 / Debian.squeeze x86_64 XEN / Aegir BOA-2.2.3 / Barracuda BOA-2.2.3 / Nginx 1.5.13 / PHP 5.3 5.2 / FPM 5.3 / CLI 5.3 / MariaDB-5.5.37 FQDN / Wildcard NO

Sun Apr 27 10:36:38 CEST 2014 / Debian.squeeze x86_64 / Aegir BOA-2.2.3 / Octopus BOA-2.2.3 / FPM 5.3 / CLI 5.3
yazzou’s picture

yazzou commented
Priority: Normal » Major
yazzou’s picture

yazzou commented

I have tried a new update barracuda + octopus and nothing changed my tasks are still pending, none of them worked...

omega8cc’s picture

omega8cc commented
Priority: Major » Normal
Status: Active » Closed (duplicate)

Please debug this on your end before re-opening duplicate issue, and only if you will be able to provide a proof that your issue is not a duplicate. Thanks.

omega8cc’s picture

omega8cc commented

Also, keep in mind that your initial request here was a 100% duplicate, because your own log confirmed that you failed to follow docs and you didn't run full barracuda+octopus upgrades. The last line in https://drupal.org/files/issues/octopus_log_16.txt is:

Fri Apr 4 12:52:03 CEST 2014 / Debian.squeeze x86_64 / Aegir BOA-2.2.1 / Octopus BOA-2.2.1 / FPM 5.3 / CLI 5.3

yazzou’s picture

yazzou commented
Status: Closed (duplicate) » Active
StatusFileSize
new debug_barracuda_upgrade.txt183.31 KB
new debug_octopus_upgrade.txt205.33 KB
new done_after_upgrade.txt1.47 KB

i have read the issue you are talking about, and what is suggested is not solving my issue. After upgrade i have restarted nginx manually because it wasn't running and the only error message i had during the upgrade was related to nginx. Please look at attached files.
Also, i tried the bash /var/xdrago/run-myuser

I got this 

load is 409 while maxload is 300
...we have to wait...
omega8cc’s picture

omega8cc commented

load is 409 while maxload is 300
...we have to wait...

This is a very clear explanation, I suppose?

You must determine what causes the high load, which paused tasks queue, and then fix the problem on your end.

yazzou’s picture

yazzou commented
StatusFileSize
new top.txt2.94 KB

Named is permanently taking 50 % or more of CPU. I wonder why, as i have note touched the configuration file of this service. Maybe a new configuration related to barracuda update causing this ? I fully rely on your scripts to configure the server and i never edit any file.

I have googled to find some solutions but all of them propose to either edit config files, change owner rights, etc. I do not want to touch anything that could break my install.

omega8cc’s picture

omega8cc commented

No idea. Are you using named for anything? Have you tried to simply restart it? or reboot the server?

yazzou’s picture

yazzou commented
StatusFileSize
new top2.txt2.85 KB

No i am not using named for anything...i am hosting 1 non drupal site (wordpress) and the only extra settings i made on the server are related to it (i followed instructions a barracuda issue to do it (https://drupal.org/node/1416798#comment-5514218).
I have rebooted the server and apparently named disappeared from processes listed as the new attached file indicates. However, the octopus instance seems to be offline, now...when i try to login to see the tasks i see this : 

Site off-line
The site is currently not available due to technical problems. Please try again later. Thank you for your understanding.

If you are the maintainer of this site, please check your database settings in the settings.php file and ensure that your hosting provider's database server is running. For more help, see the handbook, or contact your hosting provider.
omega8cc’s picture

omega8cc commented

Sorry, this is already way beyond the support we can offer here and way off-topic.

You should never install services you don't need. Now figure out how to remove it and determine why you are receiving other errors by inspecting system logs etc.

yazzou’s picture

yazzou commented

Everything seems to be back after waiting a while following the server restart. I don't what caused "named" eating all the resources and preventing me from using the system normally. Thanks for your patience !

omega8cc’s picture

omega8cc commented
Status: Active » Closed (cannot reproduce)

OK, thanks.