Closed (works as designed)
Project:
Basic webmail
Version:
6.x-1.1
Component:
Miscellaneous
Priority:
Normal
Category:
Support request
Assigned:
Unassigned
Reporter:
Created:
21 Sep 2010 at 06:50 UTC
Updated:
21 Aug 2013 at 21:06 UTC
i am a newbie in programing please help me with this while configuring the webmail module what should i fill in serverlocation field already my drupal site is sending password mail that means i think the service provider is enabled imap server. where can i get this location
my web is www.ecofriendz.6te.net
Comments
Comment #1
oadaeh commentedFor all of the settings under "Server settings", you really should know how the mail server you are connecting to is set up. If you don't know, you should contact whomever maintains it and ask them these questions.
For "Server address", you would put the mail server that your e-mail is on. Usually, this would be the part after the @ in your e-mail address with either "mail." or "imap." perpended to the front. So, if your e-mail address were user@example.com, your mail server might be mail.example.com (most common) or imap.example.com (less common). That is just the most likely use case scenario. Yours might be different. It all depends on how the mail server you are pulling mail from is set up.
The "Connection port" is usually "143". It might be "993", if SSL encryption is enabled. It might be some other port, for various reasons. Try 143 first, then 993. If neither of them work, you will need to contact whomever maintains the server and ask them what it is.
Check "Secure login" if your server requires that you log in with some encryption mechanism.
Check "Encrypt session using SSL" if your server is setup to encrypt transmissions via the Secure Socket Layer protocol. This is a different process and technology than the above item. The above item is only for logging in. This one is for all subsequent transactions.
Leave "Validate certificate" unchecked if your server's SSL certificate is self-signed (i.e.: you created it yourself, rather than paying some company to create one for you).
TLS is an alternate encryption technology to SSL that usually uses the normal IMAP port of 143. You should check "Encrypt session using TLS" if you are using encryption but not SSL.
Comment #2
oadaeh commentedThat does not mean that an IMAP server is enabled. Sending mail uses a different technology and protocol (called SMTP) than receiving it. Also, there are at least two common and different ways of receiving e-mail (IMAP and POP3). Just because you can do it one way doesn't mean the other way is available. You need to check with your service provider to find out they have available.
Comment #3
ramulingum commentedthank you i will check with the service provider about imap
Comment #4
xqbzzr commentedHi!
I just installed the module and try using it. I am sure, my Imap Server is set up correctly, as i am using it with my desktop-mail client. The settings stated by the mail-provider are quite common: "imap.mydomain.com" port 143 etc.
I can setup basic webmail with these settings, but when entering the basic_webmail path all i get is "There was an error connecting to the mail server. Contact the system administrator and/or check the logs for more information." No further explanation, not even in the logs.
I tried using the secure method on port 993 as well, which is also possible with my mail-provider, but the same error message is displayed.
I tried not using the drupal-account adress as well, but when entering the basic_webmail path i am not even prompted to enter any account or password info. Just the above error message.
Any help or hint would be very much appreciated.
Comment #5
oadaeh commentedSpecifically, which "path" are you referring to, and on which page are you entering it? The only "path" I see is the "Attachment location" on the main administration page (admin/settings/basic_webmail). Tell me the exact field name and page you are referring to.
How do you know it's the "basic_webmail path" that's causing your error?
If you're getting that error, you should have a "basic_webmail" error on your admin/reports/dblog page that starts with "There was an error accessing the remote server: ". Every time I display the message you're getting, I'm also putting that error message in the site logs.
Comment #6
xqbzzr commentedAaahrg!
The dblog entry pushed me back to my account page to enter the mailbox-settings.
I did not look there in the first try, i simply set up the module and went to the path "mydomain.com/basic_webmail" because that was stated in the Readme file.
It is completely my fault not looking hard enough for the settings. Maybe a hint in the Readme can be added for other users like
INSTALLATION AND CONFIGURATION
------------------------------
In order to use this module, you will need to do a couple of things:
* Install the module in the usual way.
* Configure the settings on the admin/settings/basic_webmail page.
* Go to 'my account' page to set up your mailbox connection.
Never mind, thank you for pushing me in the right direction.
Cheers!
Comment #7
albertog commentedHello,
I just updated Drupal to the latest version (6.28) and I set up "my account" to overcome the above problem (I also did not read the "read me" file...). Now, I get the following
warning: imap_open() [function.imap-open]: Couldn't open stream {mail.restaurantecanfranc.es:143/novalidate-cert/notls}INBOX in /var/www/vhost/restaurantecanfranc.es/home/html/modules/basic_webmail/basic_webmail.module on line 2615.
Is it still me?
regards,
Comment #8
oadaeh commented@albertog: that error basically means it cannot connect to the server. Double check and verify your settings on admin/settings/basic_webmail with some known correct information somewhere else.
Comment #9
vako commentedThank you for 'my account' tip. It saved me a lot of time and finally I can use the module.
Comment #10
oadaeh commentedClosing old issues. Reopen with more information, if this is still a problem.