Add Screen to Add/Edit Individual MP Permit Limits

Erinn - is this a per-well setting I presume?

Marking this as critical since defining well pump setting is needed for technical evaluations.

Erinn - You are able to edit the Pump Setting on the Well Construction page for all wells currently. The Pump Setting field is in the first table (Pump Settings), where you can click the pencil button to edit/change an existing pump setting or the + sign to add one that doesn't exist.

Example Well Construction Page: dh/?q=gwp-well-dash-construction/1126

If this is not the Pump Setting that you mean or would like this in a different location for ease of use, let us know.

Checking back on this. I think we ned confirmation, but it looks like you all need to be able to add individual well limits to a given permit and currently are unable to do so. Please confirm and we will get cracking.

MP since we will need this feature for both wells and intakes.

Bumping this so we can get feedback from Erinn on #2 -- do we need to be able to set this per well? Or do we just need a single limit attached to the permit?

Erinn - we added the ability to set max pump setting to the "Construction" page a while back and I think that we discussed this on another issue, but I just wanted to verify before I close this out -- tentatively marked as fixed -- please re-open if that is not the case.