diff --git a/config/.gitkeep b/config/.gitkeep deleted file mode 100644 index e69de29..0000000 diff --git a/config/acl.php b/config/acl.php deleted file mode 100644 index 7dcca16..0000000 --- a/config/acl.php +++ /dev/null @@ -1,61 +0,0 @@ - array( - //array('allow', 'equals', 'mail', 'admin1@example.org'), - //array('allow', 'has', 'groups', 'admin'), - // The default action is to deny access. - ), - - 'example-simple' => array( - array('allow', 'equals', 'mail', 'admin1@example.org'), - array('allow', 'equals', 'mail', 'admin2@example.org'), - // The default action is to deny access. - ), - - 'example-deny-some' => array( - array('deny', 'equals', 'mail', 'eviluser@example.org'), - array('allow'), // Allow everybody else. - ), - - 'example-maildomain' => array( - array('allow', 'equals-preg', 'mail', '/@example\.org$/'), - // The default action is to deny access. - ), - - 'example-allow-employees' => array( - array('allow', 'has', 'eduPersonAffiliation', 'employee'), - // The default action is to deny access. - ), - - 'example-allow-employees-not-students' => array( - array('deny', 'has', 'eduPersonAffiliation', 'student'), - array('allow', 'has', 'eduPersonAffiliation', 'employee'), - // The default action is to deny access. - ), - - 'example-deny-student-except-one' => array( - array('deny', 'and', - array('has', 'eduPersonAffiliation', 'student'), - array('not', 'equals', 'mail', 'user@example.org'), - ), - array('allow'), - ), - - 'example-allow-or' => array( - array('allow', 'or', - array('equals', 'eduPersonAffiliation', 'student', 'member'), - array('equals', 'mail', 'someuser@example2.org'), - ), - ), - - 'example-allow-all' => array( - array('allow'), - ), - -); \ No newline at end of file diff --git a/config/authmemcookie.php b/config/authmemcookie.php deleted file mode 100644 index b8e8df8..0000000 --- a/config/authmemcookie.php +++ /dev/null @@ -1,75 +0,0 @@ - 'default-sp', - - /* - * This is the name of the cookie we should save the session id in. The value of this option must match the - * Auth_memCookie_CookieName option in the Auth MemCookie configuration. The default value is 'AuthMemCookie'. - * - * Default: - * 'cookiename' => 'AuthMemCookie', - */ - 'cookiename' => 'AuthMemCookie', - - /* - * This option specifies the name of the attribute which contains the username of the user. It must be set to - * a valid attribute name. - * - * Examples: - * 'username' => 'uid', // LDAP attribute for user id. - * 'username' => 'mail', // LDAP attribute for email address. - * - * Default: - * No default value. - */ - 'username' => NULL, - - /* - * This option specifies the name of the attribute which contains the groups of the user. Set this option to - * NULL if you don't want to include any groups. - * - * Example: - * 'groups' => 'edupersonaffiliation', - * - * Default: - * 'groups' => NULL, - */ - 'groups' => NULL, - - /* - * This option contains the hostnames or IP addresses of the memcache servers where we should store the - * authentication information. Separator is a comma. This option should match the address part of the - * Auth_memCookie_Memcached_AddrPort option in the Auth MemCookie configuration. - * - * Examples: - * 'memcache.host' => '192.168.93.52', - * 'memcache.host' => 'memcache.example.org', - * 'memcache.host' => 'memcache1.example.org,memcache2.example.org' - * - * Default: - * 'memcache.host' => '127.0.0.1', - */ - 'memcache.host' => '127.0.0.1', - - /* - * This option contains the port number of the memcache server where we should store the - * authentication information. This option should match the port part of the - * Auth_memCookie_Memcached_AddrPort option in the Auth MemCookie configuration. - * - * Default: - * 'memcache.port' => 11211, - */ - 'memcache.port' => 11211, - -); diff --git a/config/authsources.php b/config/authsources.php deleted file mode 100644 index 49edc6e..0000000 --- a/config/authsources.php +++ /dev/null @@ -1,392 +0,0 @@ - array( - // The default is to use core:AdminPassword, but it can be replaced with - // any authentication source. - - 'core:AdminPassword', - ), - - - // An authentication source which can authenticate against both SAML 2.0 - // and Shibboleth 1.3 IdPs. - 'default-sp' => array( - 'saml:SP', - - // The entity ID of this SP. - // Can be NULL/unset, in which case an entity ID is generated based on the metadata URL. - 'entityID' => null, - - // The entity ID of the IdP this should SP should contact. - // Can be NULL/unset, in which case the user will be shown a list of available IdPs. - 'idp' => null, - - // The URL to the discovery service. - // Can be NULL/unset, in which case a builtin discovery service will be used. - 'discoURL' => null, - - /* - * WARNING: SHA-1 is disallowed starting January the 1st, 2014. - * - * Uncomment the following option to start using SHA-256 for your signatures. - * Currently, SimpleSAMLphp defaults to SHA-1, which has been deprecated since - * 2011, and will be disallowed by NIST as of 2014. Please refer to the following - * document for more information: - * - * http://csrc.nist.gov/publications/nistpubs/800-131A/sp800-131A.pdf - * - * If you are uncertain about identity providers supporting SHA-256 or other - * algorithms of the SHA-2 family, you can configure it individually in the - * IdP-remote metadata set for those that support it. Once you are certain that - * all your configured IdPs support SHA-2, you can safely remove the configuration - * options in the IdP-remote metadata set and uncomment the following option. - * - * Please refer to the hosted SP configuration reference for more information. - */ - //'signature.algorithm' => 'http://www.w3.org/2001/04/xmldsig-more#rsa-sha256', - - /* - * The attributes parameter must contain an array of desired attributes by the SP. - * The attributes can be expressed as an array of names or as an associative array - * in the form of 'friendlyName' => 'name'. - * The metadata will then be created as follows: - * - */ - /*'attributes' => array( - 'attrname' => 'urn:oid:x.x.x.x', - ),*/ - /*'attributes.required' => array ( - 'urn:oid:x.x.x.x', - ),*/ - ), - - - /* - 'example-sql' => array( - 'sqlauth:SQL', - 'dsn' => 'pgsql:host=sql.example.org;port=5432;dbname=simplesaml', - 'username' => 'simplesaml', - 'password' => 'secretpassword', - 'query' => 'SELECT uid, givenName, email, eduPersonPrincipalName FROM users WHERE uid = :username AND password = SHA2(CONCAT((SELECT salt FROM users WHERE uid = :username), :password),256);', - ), - */ - - /* - 'example-static' => array( - 'exampleauth:Static', - 'uid' => array('testuser'), - 'eduPersonAffiliation' => array('member', 'employee'), - 'cn' => array('Test User'), - ), - */ - - /* - 'example-userpass' => array( - 'exampleauth:UserPass', - - // Give the user an option to save their username for future login attempts - // And when enabled, what should the default be, to save the username or not - //'remember.username.enabled' => FALSE, - //'remember.username.checked' => FALSE, - - 'student:studentpass' => array( - 'uid' => array('test'), - 'eduPersonAffiliation' => array('member', 'student'), - ), - 'employee:employeepass' => array( - 'uid' => array('employee'), - 'eduPersonAffiliation' => array('member', 'employee'), - ), - ), - */ - - /* - 'crypto-hash' => array( - 'authcrypt:Hash', - // hashed version of 'verysecret', made with bin/pwgen.php - 'professor:{SSHA256}P6FDTEEIY2EnER9a6P2GwHhI5JDrwBgjQ913oVQjBngmCtrNBUMowA==' => array( - 'uid' => array('prof_a'), - 'eduPersonAffiliation' => array('member', 'employee', 'board'), - ), - ), - */ - - /* - 'htpasswd' => array( - 'authcrypt:Htpasswd', - 'htpasswd_file' => '/var/www/foo.edu/legacy_app/.htpasswd', - 'static_attributes' => array( - 'eduPersonAffiliation' => array('member', 'employee'), - 'Organization' => array('University of Foo'), - ), - ), - */ - - /* - // This authentication source serves as an example of integration with an - // external authentication engine. Take a look at the comment in the beginning - // of modules/exampleauth/lib/Auth/Source/External.php for a description of - // how to adjust it to your own site. - 'example-external' => array( - 'exampleauth:External', - ), - */ - - /* - 'yubikey' => array( - 'authYubiKey:YubiKey', - 'id' => '000', - // 'key' => '012345678', - ), - */ - - /* - 'openid' => array( - 'openid:OpenIDConsumer', - 'attributes.required' => array('nickname'), - 'attributes.optional' => array('fullname', 'email',), - // 'sreg.validate' => FALSE, - 'attributes.ax_required' => array('http://axschema.org/namePerson/friendly'), - 'attributes.ax_optional' => array('http://axschema.org/namePerson','http://axschema.org/contact/email'), - // Prefer HTTP redirect over POST - // 'prefer_http_redirect' => FALSE, - ), - */ - - /* - // Example of an authsource that authenticates against Google. - // See: http://code.google.com/apis/accounts/docs/OpenID.html - 'google' => array( - 'openid:OpenIDConsumer', - // Googles OpenID endpoint. - 'target' => 'https://www.google.com/accounts/o8/id', - // Custom realm - // 'realm' => 'http://*.example.org', - // Attributes that google can supply. - 'attributes.ax_required' => array( - //'http://axschema.org/namePerson/first', - //'http://axschema.org/namePerson/last', - //'http://axschema.org/contact/email', - //'http://axschema.org/contact/country/home', - //'http://axschema.org/pref/language', - ), - // custom extension arguments - 'extension.args' => array( - //'http://specs.openid.net/extensions/ui/1.0' => array( - // 'mode' => 'popup', - // 'icon' => 'true', - //), - ), - ), - */ - - /* - 'papi' => array( - 'authpapi:PAPI', - ), - */ - - - /* - 'facebook' => array( - 'authfacebook:Facebook', - // Register your Facebook application on http://www.facebook.com/developers - // App ID or API key (requests with App ID should be faster; https://github.com/facebook/php-sdk/issues/214) - 'api_key' => 'xxxxxxxxxxxxxxxx', - // App Secret - 'secret' => 'xxxxxxxxxxxxxxxx', - // which additional data permissions to request from user - // see http://developers.facebook.com/docs/authentication/permissions/ for the full list - // 'req_perms' => 'email,user_birthday', - ), - */ - - /* - // LinkedIn OAuth Authentication API. - // Register your application to get an API key here: - // https://www.linkedin.com/secure/developer - 'linkedin' => array( - 'authlinkedin:LinkedIn', - 'key' => 'xxxxxxxxxxxxxxxx', - 'secret' => 'xxxxxxxxxxxxxxxx', - ), - */ - - /* - // Twitter OAuth Authentication API. - // Register your application to get an API key here: - // http://twitter.com/oauth_clients - 'twitter' => array( - 'authtwitter:Twitter', - 'key' => 'xxxxxxxxxxxxxxxx', - 'secret' => 'xxxxxxxxxxxxxxxx', - - // Forces the user to enter their credentials to ensure the correct users account is authorized. - // Details: https://dev.twitter.com/docs/api/1/get/oauth/authenticate - 'force_login' => FALSE, - ), - */ - - /* - // MySpace OAuth Authentication API. - // Register your application to get an API key here: - // http://developer.myspace.com/ - 'myspace' => array( - 'authmyspace:MySpace', - 'key' => 'xxxxxxxxxxxxxxxx', - 'secret' => 'xxxxxxxxxxxxxxxx', - ), - */ - - /* - // Microsoft Account (Windows Live ID) Authentication API. - // Register your application to get an API key here: - // https://apps.dev.microsoft.com/ - 'windowslive' => array( - 'authwindowslive:LiveID', - 'key' => 'xxxxxxxxxxxxxxxx', - 'secret' => 'xxxxxxxxxxxxxxxx', - ), - */ - - /* - // Example of a LDAP authentication source. - 'example-ldap' => array( - 'ldap:LDAP', - - // Give the user an option to save their username for future login attempts - // And when enabled, what should the default be, to save the username or not - //'remember.username.enabled' => FALSE, - //'remember.username.checked' => FALSE, - - // The hostname of the LDAP server. - 'hostname' => 'ldap.example.org', - - // Whether SSL/TLS should be used when contacting the LDAP server. - 'enable_tls' => TRUE, - - // Whether debug output from the LDAP library should be enabled. - // Default is FALSE. - 'debug' => FALSE, - - // The timeout for accessing the LDAP server, in seconds. - // The default is 0, which means no timeout. - 'timeout' => 0, - - // The port used when accessing the LDAP server. - // The default is 389. - 'port' => 389, - - // Set whether to follow referrals. AD Controllers may require FALSE to function. - 'referrals' => TRUE, - - // Which attributes should be retrieved from the LDAP server. - // This can be an array of attribute names, or NULL, in which case - // all attributes are fetched. - 'attributes' => NULL, - - // The pattern which should be used to create the users DN given the username. - // %username% in this pattern will be replaced with the users username. - // - // This option is not used if the search.enable option is set to TRUE. - 'dnpattern' => 'uid=%username%,ou=people,dc=example,dc=org', - - // As an alternative to specifying a pattern for the users DN, it is possible to - // search for the username in a set of attributes. This is enabled by this option. - 'search.enable' => FALSE, - - // The DN which will be used as a base for the search. - // This can be a single string, in which case only that DN is searched, or an - // array of strings, in which case they will be searched in the order given. - 'search.base' => 'ou=people,dc=example,dc=org', - - // The attribute(s) the username should match against. - // - // This is an array with one or more attribute names. Any of the attributes in - // the array may match the value the username. - 'search.attributes' => array('uid', 'mail'), - - // The username & password the SimpleSAMLphp should bind to before searching. If - // this is left as NULL, no bind will be performed before searching. - 'search.username' => NULL, - 'search.password' => NULL, - - // If the directory uses privilege separation, - // the authenticated user may not be able to retrieve - // all required attribures, a privileged entity is required - // to get them. This is enabled with this option. - 'priv.read' => FALSE, - - // The DN & password the SimpleSAMLphp should bind to before - // retrieving attributes. These options are required if - // 'priv.read' is set to TRUE. - 'priv.username' => NULL, - 'priv.password' => NULL, - - ), - */ - - /* - // Example of an LDAPMulti authentication source. - 'example-ldapmulti' => array( - 'ldap:LDAPMulti', - - // Give the user an option to save their username for future login attempts - // And when enabled, what should the default be, to save the username or not - //'remember.username.enabled' => FALSE, - //'remember.username.checked' => FALSE, - - // The way the organization as part of the username should be handled. - // Three possible values: - // - 'none': No handling of the organization. Allows '@' to be part - // of the username. - // - 'allow': Will allow users to type 'username@organization'. - // - 'force': Force users to type 'username@organization'. The dropdown - // list will be hidden. - // - // The default is 'none'. - 'username_organization_method' => 'none', - - // Whether the organization should be included as part of the username - // when authenticating. If this is set to TRUE, the username will be on - // the form @. If this is FALSE, the - // username will be used as the user enters it. - // - // The default is FALSE. - 'include_organization_in_username' => FALSE, - - // A list of available LDAP servers. - // - // The index is an identifier for the organization/group. When - // 'username_organization_method' is set to something other than 'none', - // the organization-part of the username is matched against the index. - // - // The value of each element is an array in the same format as an LDAP - // authentication source. - 'employees' => array( - // A short name/description for this group. Will be shown in a dropdown list - // when the user logs on. - // - // This option can be a string or an array with language => text mappings. - 'description' => 'Employees', - - // The rest of the options are the same as those available for - // the LDAP authentication source. - 'hostname' => 'ldap.employees.example.org', - 'dnpattern' => 'uid=%username%,ou=employees,dc=example,dc=org', - ), - - 'students' => array( - 'description' => 'Students', - - 'hostname' => 'ldap.students.example.org', - 'dnpattern' => 'uid=%username%,ou=students,dc=example,dc=org', - ), - - ), - */ - -); diff --git a/config/cas-ldap.php b/config/cas-ldap.php deleted file mode 100644 index 255b778..0000000 --- a/config/cas-ldap.php +++ /dev/null @@ -1,38 +0,0 @@ - array( - 'cas' => array( - 'login' => 'https://idpentityid.example.org/cas/login', - 'validate' => 'https://idpentityid.example.org/cas/validate', - ), - 'ldap' => array( - 'servers' => 'idpentityid.example.org', - 'enable_tls' => true, - 'searchbase' => 'dc=example,dc=org', - 'searchattributes' => 'uid', - 'attributes' => array('cn', 'mail'), - ), - ), - 'idpentityid2.example.org' => array( - 'cas' => array( - 'login' => 'https://idpentityid2.example.org/login', - 'validate' => 'https://idpentityid2.example.org/validate', - ), - 'ldap' => array( - 'servers' => 'ldap://idpentityid2.example.org', - 'enable_tls' => true, - 'searchbase' => 'ou=users,dc=example,dc=org', - 'searchattributes' => array('uid', 'mail'), # array for being able to login with either uid or mail. - 'attributes' => null, - 'priv_user_dn' => 'uid=admin,ou=users,dc=example,dc=org', - 'priv_user_pw' => 'xxxxx', - ), - ), - -); diff --git a/config/config-login-auto.php b/config/config-login-auto.php deleted file mode 100644 index 2412882..0000000 --- a/config/config-login-auto.php +++ /dev/null @@ -1,63 +0,0 @@ - true, - - /* - * This option configures which attributes the login-auto - * authentication handler will set for the user. It is an array of - * arrays. The name of the attribute is the index in the first array, - * and all the values for the attribute is given in the array - * referenced to by the name. - * - * Example: - * 'auth.auto.attributes' => array( - * 'edupersonaffiliation' => array('student', 'member'), - * 'uid' => array('example_uid'), - * 'mail' => array('example@example.com'), - * ), - */ - 'auth.auto.attributes' => array( - 'edupersonaffiliation' => array('student', 'member'), - 'title' => array('Example user title'), - 'uid' => array('example_uid'), - 'mail' => array('example@example.com'), - 'cn' => array('Example user commonname'), - 'givenname' => array('Example user givenname'), - 'sn' => array("Example surname"), - ), - - /* - * When this option is set to true, the login-auto authentication - * handler will ask for a username and a password. This can be used to - * test the IdP. The username and password isn't verified, and the - * user/script can enter anything. - */ - 'auth.auto.ask_login' => false, - - /* - * This option configures a delay in the login-auto authentication - * handler. The script will wait for the given number of milliseconds - * before authenticating the user. This can, for example, be used in - * a simple simulation of a slow LDAP server. - */ - 'auth.auto.delay_login' => 0, -); diff --git a/config/config-login-feide.php b/config/config-login-feide.php deleted file mode 100644 index 9625323..0000000 --- a/config/config-login-feide.php +++ /dev/null @@ -1,37 +0,0 @@ - array( - - 'example1.com' => array( - 'description' => 'Example Org 1', - 'searchbase' => 'cn=people,dc=example1,dc=com', - 'hostname' => 'ldaps://ldap.example1.com', - 'attributes' => null, - - 'contactMail' => 'admin@example1.com', - 'contactURL' => 'http://admin.example1.com', - - // System user to bind() before we do a search for eduPersonPrincipalName - 'adminUser' => 'uid=admin,dc=example1,dc=com', - 'adminPassword' => 'xxx', - - ), - 'example1.com' => array( - 'description' => 'Example Org 1', - 'searchbase' => 'cn=people,dc=example1,dc=com', - 'hostname' => 'ldaps://ldap.example1.com', - - 'attributes' => array('mail', 'street'), - ), - ), -); diff --git a/config/config.php b/config/config.php deleted file mode 100644 index 7c820bb..0000000 --- a/config/config.php +++ /dev/null @@ -1,851 +0,0 @@ - 'simplesaml/', - 'certdir' => 'cert/', - 'loggingdir' => 'log/', - 'datadir' => 'data/', - - /* - * A directory where SimpleSAMLphp can save temporary files. - * - * SimpleSAMLphp will attempt to create this directory if it doesn't exist. - */ - 'tempdir' => '/tmp/simplesaml', - - - /* - * If you enable this option, SimpleSAMLphp will log all sent and received messages - * to the log file. - * - * This option also enables logging of the messages that are encrypted and decrypted. - * - * Note: The messages are logged with the DEBUG log level, so you also need to set - * the 'logging.level' option to LOG_DEBUG. - */ - 'debug' => false, - - /* - * When showerrors is enabled, all error messages and stack traces will be output - * to the browser. - * - * When errorreporting is enabled, a form will be presented for the user to report - * the error to technicalcontact_email. - */ - 'showerrors' => true, - 'errorreporting' => true, - - /** - * Custom error show function called from SimpleSAML_Error_Error::show. - * See docs/simplesamlphp-errorhandling.txt for function code example. - * - * Example: - * 'errors.show_function' => array('sspmod_example_Error_Show', 'show'), - */ - - /** - * This option allows you to enable validation of XML data against its - * schemas. A warning will be written to the log if validation fails. - */ - 'debug.validatexml' => false, - - /** - * This password must be kept secret, and modified from the default value 123. - * This password will give access to the installation page of SimpleSAMLphp with - * metadata listing and diagnostics pages. - * You can also put a hash here; run "bin/pwgen.php" to generate one. - */ - 'auth.adminpassword' => '123', - 'admin.protectindexpage' => false, - 'admin.protectmetadata' => false, - - /** - * This is a secret salt used by SimpleSAMLphp when it needs to generate a secure hash - * of a value. It must be changed from its default value to a secret value. The value of - * 'secretsalt' can be any valid string of any length. - * - * A possible way to generate a random salt is by running the following command from a unix shell: - * tr -c -d '0123456789abcdefghijklmnopqrstuvwxyz' /dev/null;echo - */ - 'secretsalt' => 'defaultsecretsalt', - - /* - * Some information about the technical persons running this installation. - * The email address will be used as the recipient address for error reports, and - * also as the technical contact in generated metadata. - */ - 'technicalcontact_name' => 'Administrator', - 'technicalcontact_email' => 'na@example.org', - - /* - * The timezone of the server. This option should be set to the timezone you want - * SimpleSAMLphp to report the time in. The default is to guess the timezone based - * on your system timezone. - * - * See this page for a list of valid timezones: http://php.net/manual/en/timezones.php - */ - 'timezone' => null, - - /* - * Logging. - * - * define the minimum log level to log - * SimpleSAML_Logger::ERR No statistics, only errors - * SimpleSAML_Logger::WARNING No statistics, only warnings/errors - * SimpleSAML_Logger::NOTICE Statistics and errors - * SimpleSAML_Logger::INFO Verbose logs - * SimpleSAML_Logger::DEBUG Full debug logs - not recommended for production - * - * Choose logging handler. - * - * Options: [syslog,file,errorlog] - * - */ - 'logging.level' => SimpleSAML_Logger::NOTICE, - 'logging.handler' => 'syslog', - - /* - * Specify the format of the logs. Its use varies depending on the log handler used (for instance, you cannot - * control here how dates are displayed when using the syslog or errorlog handlers), but in general the options - * are: - * - * - %date{}: the date and time, with its format specified inside the brackets. See the PHP documentation - * of the strftime() function for more information on the format. If the brackets are omitted, the standard - * format is applied. This can be useful if you just want to control the placement of the date, but don't care - * about the format. - * - * - %process: the name of the SimpleSAMLphp process. Remember you can configure this in the 'logging.processname' - * option below. - * - * - %level: the log level (name or number depending on the handler used). - * - * - %stat: if the log entry is intended for statistical purposes, it will print the string 'STAT ' (bear in mind - * the trailing space). - * - * - %trackid: the track ID, an identifier that allows you to track a single session. - * - * - %srcip: the IP address of the client. If you are behind a proxy, make sure to modify the - * $_SERVER['REMOTE_ADDR'] variable on your code accordingly to the X-Forwarded-For header. - * - * - %msg: the message to be logged. - * - */ - //'logging.format' => '%date{%b %d %H:%M:%S} %process %level %stat[%trackid] %msg', - - /* - * Choose which facility should be used when logging with syslog. - * - * These can be used for filtering the syslog output from SimpleSAMLphp into its - * own file by configuring the syslog daemon. - * - * See the documentation for openlog (http://php.net/manual/en/function.openlog.php) for available - * facilities. Note that only LOG_USER is valid on windows. - * - * The default is to use LOG_LOCAL5 if available, and fall back to LOG_USER if not. - */ - 'logging.facility' => defined('LOG_LOCAL5') ? constant('LOG_LOCAL5') : LOG_USER, - - /* - * The process name that should be used when logging to syslog. - * The value is also written out by the other logging handlers. - */ - 'logging.processname' => 'simplesamlphp', - - /* Logging: file - Logfilename in the loggingdir from above. - */ - 'logging.logfile' => 'simplesamlphp.log', - - /* (New) statistics output configuration. - * - * This is an array of outputs. Each output has at least a 'class' option, which - * selects the output. - */ - 'statistics.out' => array(// Log statistics to the normal log. - /* - array( - 'class' => 'core:Log', - 'level' => 'notice', - ), - */ - // Log statistics to files in a directory. One file per day. - /* - array( - 'class' => 'core:File', - 'directory' => '/var/log/stats', - ), - */ - ), - - - - /* - * Database - * - * This database configuration is optional. If you are not using - * core functionality or modules that require a database, you can - * skip this configuration. - */ - - /* - * Database connection string. - * Ensure that you have the required PDO database driver installed - * for your connection string. - */ - 'database.dsn' => 'mysql:host=localhost;dbname=saml', - - /* - * SQL database credentials - */ - 'database.username' => 'simplesamlphp', - 'database.password' => 'secret', - - /* - * (Optional) Table prefix - */ - 'database.prefix' => '', - - /* - * True or false if you would like a persistent database connection - */ - 'database.persistent' => false, - - /* - * Database slave configuration is optional as well. If you are only - * running a single database server, leave this blank. If you have - * a master/slave configuration, you can define as many slave servers - * as you want here. Slaves will be picked at random to be queried from. - * - * Configuration options in the slave array are exactly the same as the - * options for the master (shown above) with the exception of the table - * prefix. - */ - 'database.slaves' => array( - /* - array( - 'dsn' => 'mysql:host=myslave;dbname=saml', - 'username' => 'simplesamlphp', - 'password' => 'secret', - 'persistent' => false, - ), - */ - ), - - - - /* - * Enable - * - * Which functionality in SimpleSAMLphp do you want to enable. Normally you would enable only - * one of the functionalities below, but in some cases you could run multiple functionalities. - * In example when you are setting up a federation bridge. - */ - 'enable.saml20-idp' => false, - 'enable.shib13-idp' => false, - 'enable.adfs-idp' => false, - 'enable.wsfed-sp' => false, - 'enable.authmemcookie' => false, - - - /* - * Module enable configuration - * - * Configuration to override module enabling/disabling. - * - * Example: - * - * 'module.enable' => array( - * // Setting to TRUE enables. - * 'exampleauth' => TRUE, - * // Setting to FALSE disables. - * 'saml' => FALSE, - * // Unset or NULL uses default. - * 'core' => NULL, - * ), - * - */ - - - /* - * This value is the duration of the session in seconds. Make sure that the time duration of - * cookies both at the SP and the IdP exceeds this duration. - */ - 'session.duration' => 8 * (60 * 60), // 8 hours. - - /* - * Sets the duration, in seconds, data should be stored in the datastore. As the datastore is used for - * login and logout requests, thid option will control the maximum time these operations can take. - * The default is 4 hours (4*60*60) seconds, which should be more than enough for these operations. - */ - 'session.datastore.timeout' => (4 * 60 * 60), // 4 hours - - /* - * Sets the duration, in seconds, auth state should be stored. - */ - 'session.state.timeout' => (60 * 60), // 1 hour - - /* - * Option to override the default settings for the session cookie name - */ - 'session.cookie.name' => 'SimpleSAMLSessionID', - - /* - * Expiration time for the session cookie, in seconds. - * - * Defaults to 0, which means that the cookie expires when the browser is closed. - * - * Example: - * 'session.cookie.lifetime' => 30*60, - */ - 'session.cookie.lifetime' => 0, - - /* - * Limit the path of the cookies. - * - * Can be used to limit the path of the cookies to a specific subdirectory. - * - * Example: - * 'session.cookie.path' => '/simplesaml/', - */ - 'session.cookie.path' => '/', - - /* - * Cookie domain. - * - * Can be used to make the session cookie available to several domains. - * - * Example: - * 'session.cookie.domain' => '.example.org', - */ - 'session.cookie.domain' => null, - - /* - * Set the secure flag in the cookie. - * - * Set this to TRUE if the user only accesses your service - * through https. If the user can access the service through - * both http and https, this must be set to FALSE. - */ - 'session.cookie.secure' => false, - - /* - * Enable secure POST from HTTPS to HTTP. - * - * If you have some SP's on HTTP and IdP is normally on HTTPS, this option - * enables secure POSTing to HTTP endpoint without warning from browser. - * - * For this to work, module.php/core/postredirect.php must be accessible - * also via HTTP on IdP, e.g. if your IdP is on - * https://idp.example.org/ssp/, then - * http://idp.example.org/ssp/module.php/core/postredirect.php must be accessible. - */ - 'enable.http_post' => false, - - /* - * Options to override the default settings for php sessions. - */ - 'session.phpsession.cookiename' => null, - 'session.phpsession.savepath' => null, - 'session.phpsession.httponly' => true, - - /* - * Option to override the default settings for the auth token cookie - */ - 'session.authtoken.cookiename' => 'SimpleSAMLAuthToken', - - /* - * Options for remember me feature for IdP sessions. Remember me feature - * has to be also implemented in authentication source used. - * - * Option 'session.cookie.lifetime' should be set to zero (0), i.e. cookie - * expires on browser session if remember me is not checked. - * - * Session duration ('session.duration' option) should be set according to - * 'session.rememberme.lifetime' option. - * - * It's advised to use remember me feature with session checking function - * defined with 'session.check_function' option. - */ - 'session.rememberme.enable' => false, - 'session.rememberme.checked' => false, - 'session.rememberme.lifetime' => (14 * 86400), - - /** - * Custom function for session checking called on session init and loading. - * See docs/simplesamlphp-advancedfeatures.txt for function code example. - * - * Example: - * 'session.check_function' => array('sspmod_example_Util', 'checkSession'), - */ - - /* - * Languages available, RTL languages, and what language is default - */ - 'language.available' => array( - 'en', 'no', 'nn', 'se', 'da', 'de', 'sv', 'fi', 'es', 'fr', 'it', 'nl', 'lb', 'cs', - 'sl', 'lt', 'hr', 'hu', 'pl', 'pt', 'pt-br', 'tr', 'ja', 'zh', 'zh-tw', 'ru', 'et', - 'he', 'id', 'sr', 'lv', 'ro', 'eu' - ), - 'language.rtl' => array('ar', 'dv', 'fa', 'ur', 'he'), - 'language.default' => 'en', - - /* - * Options to override the default settings for the language parameter - */ - 'language.parameter.name' => 'language', - 'language.parameter.setcookie' => true, - - /* - * Options to override the default settings for the language cookie - */ - 'language.cookie.name' => 'language', - 'language.cookie.domain' => null, - 'language.cookie.path' => '/', - 'language.cookie.lifetime' => (60 * 60 * 24 * 900), - - /** - * Custom getLanguage function called from SimpleSAML_XHTML_Template::getLanguage(). - * Function should return language code of one of the available languages or NULL. - * See SimpleSAML_XHTML_Template::getLanguage() source code for more info. - * - * This option can be used to implement a custom function for determining - * the default language for the user. - * - * Example: - * 'language.get_language_function' => array('sspmod_example_Template', 'getLanguage'), - */ - - /* - * Extra dictionary for attribute names. - * This can be used to define local attributes. - * - * The format of the parameter is a string with :. - * - * Specifying this option will cause us to look for modules//dictionaries/.definition.json - * The dictionary should look something like: - * - * { - * "firstattribute": { - * "en": "English name", - * "no": "Norwegian name" - * }, - * "secondattribute": { - * "en": "English name", - * "no": "Norwegian name" - * } - * } - * - * Note that all attribute names in the dictionary must in lowercase. - * - * Example: 'attributes.extradictionary' => 'ourmodule:ourattributes', - */ - 'attributes.extradictionary' => null, - - /* - * Which theme directory should be used? - */ - 'theme.use' => 'default', - - - /* - * Default IdP for WS-Fed. - */ - 'default-wsfed-idp' => 'urn:federation:pingfederate:localhost', - - /* - * Whether the discovery service should allow the user to save his choice of IdP. - */ - 'idpdisco.enableremember' => true, - 'idpdisco.rememberchecked' => true, - - // Disco service only accepts entities it knows. - 'idpdisco.validate' => true, - - 'idpdisco.extDiscoveryStorage' => null, - - /* - * IdP Discovery service look configuration. - * Wether to display a list of idp or to display a dropdown box. For many IdP' a dropdown box - * gives the best use experience. - * - * When using dropdown box a cookie is used to highlight the previously chosen IdP in the dropdown. - * This makes it easier for the user to choose the IdP - * - * Options: [links,dropdown] - * - */ - 'idpdisco.layout' => 'dropdown', - - /* - * Whether SimpleSAMLphp should sign the response or the assertion in SAML 1.1 authentication - * responses. - * - * The default is to sign the assertion element, but that can be overridden by setting this - * option to TRUE. It can also be overridden on a pr. SP basis by adding an option with the - * same name to the metadata of the SP. - */ - 'shib13.signresponse' => true, - - - /* - * Authentication processing filters that will be executed for all IdPs - * Both Shibboleth and SAML 2.0 - */ - 'authproc.idp' => array( - /* Enable the authproc filter below to add URN Prefixces to all attributes - 10 => array( - 'class' => 'core:AttributeMap', 'addurnprefix' - ), */ - /* Enable the authproc filter below to automatically generated eduPersonTargetedID. - 20 => 'core:TargetedID', - */ - - // Adopts language from attribute to use in UI - 30 => 'core:LanguageAdaptor', - - /* Add a realm attribute from edupersonprincipalname - 40 => 'core:AttributeRealm', - */ - 45 => array( - 'class' => 'core:StatisticsWithAttribute', - 'attributename' => 'realm', - 'type' => 'saml20-idp-SSO', - ), - - /* When called without parameters, it will fallback to filter attributes ‹the old way› - * by checking the 'attributes' parameter in metadata on IdP hosted and SP remote. - */ - 50 => 'core:AttributeLimit', - - /* - * Search attribute "distinguishedName" for pattern and replaces if found - - 60 => array( - 'class' => 'core:AttributeAlter', - 'pattern' => '/OU=studerende/', - 'replacement' => 'Student', - 'subject' => 'distinguishedName', - '%replace', - ), - */ - - /* - * Consent module is enabled (with no permanent storage, using cookies). - - 90 => array( - 'class' => 'consent:Consent', - 'store' => 'consent:Cookie', - 'focus' => 'yes', - 'checked' => TRUE - ), - */ - // If language is set in Consent module it will be added as an attribute. - 99 => 'core:LanguageAdaptor', - ), - /* - * Authentication processing filters that will be executed for all SPs - * Both Shibboleth and SAML 2.0 - */ - 'authproc.sp' => array( - /* - 10 => array( - 'class' => 'core:AttributeMap', 'removeurnprefix' - ), - */ - - /* - * Generate the 'group' attribute populated from other variables, including eduPersonAffiliation. - 60 => array( - 'class' => 'core:GenerateGroups', 'eduPersonAffiliation' - ), - */ - /* - * All users will be members of 'users' and 'members' - 61 => array( - 'class' => 'core:AttributeAdd', 'groups' => array('users', 'members') - ), - */ - - // Adopts language from attribute to use in UI - 90 => 'core:LanguageAdaptor', - - ), - - - /* - * This option configures the metadata sources. The metadata sources is given as an array with - * different metadata sources. When searching for metadata, simpleSAMPphp will search through - * the array from start to end. - * - * Each element in the array is an associative array which configures the metadata source. - * The type of the metadata source is given by the 'type' element. For each type we have - * different configuration options. - * - * Flat file metadata handler: - * - 'type': This is always 'flatfile'. - * - 'directory': The directory we will load the metadata files from. The default value for - * this option is the value of the 'metadatadir' configuration option, or - * 'metadata/' if that option is unset. - * - * XML metadata handler: - * This metadata handler parses an XML file with either an EntityDescriptor element or an - * EntitiesDescriptor element. The XML file may be stored locally, or (for debugging) on a remote - * web server. - * The XML hetadata handler defines the following options: - * - 'type': This is always 'xml'. - * - 'file': Path to the XML file with the metadata. - * - 'url': The URL to fetch metadata from. THIS IS ONLY FOR DEBUGGING - THERE IS NO CACHING OF THE RESPONSE. - * - * MDX metadata handler: - * This metadata handler looks up for the metadata of an entity at the given MDX server. - * The MDX metadata handler defines the following options: - * - 'type': This is always 'mdx'. - * - 'server': URL of the MDX server (url:port). Mandatory. - * - 'validateFingerprint': The fingerprint of the certificate used to sign the metadata. - * You don't need this option if you don't want to validate the signature on the metadata. Optional. - * - 'cachedir': Directory where metadata can be cached. Optional. - * - 'cachelength': Maximum time metadata cah be cached, in seconds. Default to 24 - * hours (86400 seconds). Optional. - * - * PDO metadata handler: - * This metadata handler looks up metadata of an entity stored in a database. - * - * Note: If you are using the PDO metadata handler, you must configure the database - * options in this configuration file. - * - * The PDO metadata handler defines the following options: - * - 'type': This is always 'pdo'. - * - * - * Examples: - * - * This example defines two flatfile sources. One is the default metadata directory, the other - * is a metadata directory with autogenerated metadata files. - * - * 'metadata.sources' => array( - * array('type' => 'flatfile'), - * array('type' => 'flatfile', 'directory' => 'metadata-generated'), - * ), - * - * This example defines a flatfile source and an XML source. - * 'metadata.sources' => array( - * array('type' => 'flatfile'), - * array('type' => 'xml', 'file' => 'idp.example.org-idpMeta.xml'), - * ), - * - * This example defines an mdx source. - * 'metadata.sources' => array( - * array('type' => 'mdx', server => 'http://mdx.server.com:8080', 'cachedir' => '/var/simplesamlphp/mdx-cache', 'cachelength' => 86400) - * ), - * - * This example defines an pdo source. - * 'metadata.sources' => array( - * array('type' => 'pdo') - * ), - * - * Default: - * 'metadata.sources' => array( - * array('type' => 'flatfile') - * ), - */ - 'metadata.sources' => array( - array('type' => 'flatfile'), - ), - - - /* - * Configure the datastore for SimpleSAMLphp. - * - * - 'phpsession': Limited datastore, which uses the PHP session. - * - 'memcache': Key-value datastore, based on memcache. - * - 'sql': SQL datastore, using PDO. - * - * The default datastore is 'phpsession'. - * - * (This option replaces the old 'session.handler'-option.) - */ - 'store.type' => 'phpsession', - - - /* - * The DSN the sql datastore should connect to. - * - * See http://www.php.net/manual/en/pdo.drivers.php for the various - * syntaxes. - */ - 'store.sql.dsn' => 'sqlite:/path/to/sqlitedatabase.sq3', - - /* - * The username and password to use when connecting to the database. - */ - 'store.sql.username' => null, - 'store.sql.password' => null, - - /* - * The prefix we should use on our tables. - */ - 'store.sql.prefix' => 'SimpleSAMLphp', - - - /* - * Configuration for the 'memcache' session store. This allows you to store - * multiple redundant copies of sessions on different memcache servers. - * - * 'memcache_store.servers' is an array of server groups. Every data - * item will be mirrored in every server group. - * - * Each server group is an array of servers. The data items will be - * load-balanced between all servers in each server group. - * - * Each server is an array of parameters for the server. The following - * options are available: - * - 'hostname': This is the hostname or ip address where the - * memcache server runs. This is the only required option. - * - 'port': This is the port number of the memcache server. If this - * option isn't set, then we will use the 'memcache.default_port' - * ini setting. This is 11211 by default. - * - 'weight': This sets the weight of this server in this server - * group. http://php.net/manual/en/function.Memcache-addServer.php - * contains more information about the weight option. - * - 'timeout': The timeout for this server. By default, the timeout - * is 3 seconds. - * - * Example of redundant configuration with load balancing: - * This configuration makes it possible to lose both servers in the - * a-group or both servers in the b-group without losing any sessions. - * Note that sessions will be lost if one server is lost from both the - * a-group and the b-group. - * - * 'memcache_store.servers' => array( - * array( - * array('hostname' => 'mc_a1'), - * array('hostname' => 'mc_a2'), - * ), - * array( - * array('hostname' => 'mc_b1'), - * array('hostname' => 'mc_b2'), - * ), - * ), - * - * Example of simple configuration with only one memcache server, - * running on the same computer as the web server: - * Note that all sessions will be lost if the memcache server crashes. - * - * 'memcache_store.servers' => array( - * array( - * array('hostname' => 'localhost'), - * ), - * ), - * - */ - 'memcache_store.servers' => array( - array( - array('hostname' => 'localhost'), - ), - ), - - - /* - * This value allows you to set a prefix for memcache-keys. The default - * for this value is 'simpleSAMLphp', which is fine in most cases. - * - * When running multiple instances of SSP on the same host, and more - * than one instance is using memcache, you probably want to assign - * a unique value per instance to this setting to avoid data collision. - */ - 'memcache_store.prefix' => null, - - - /* - * This value is the duration data should be stored in memcache. Data - * will be dropped from the memcache servers when this time expires. - * The time will be reset every time the data is written to the - * memcache servers. - * - * This value should always be larger than the 'session.duration' - * option. Not doing this may result in the session being deleted from - * the memcache servers while it is still in use. - * - * Set this value to 0 if you don't want data to expire. - * - * Note: The oldest data will always be deleted if the memcache server - * runs out of storage space. - */ - 'memcache_store.expires' => 36 * (60 * 60), // 36 hours. - - - /* - * Should signing of generated metadata be enabled by default. - * - * Metadata signing can also be enabled for a individual SP or IdP by setting the - * same option in the metadata for the SP or IdP. - */ - 'metadata.sign.enable' => false, - - /* - * The default key & certificate which should be used to sign generated metadata. These - * are files stored in the cert dir. - * These values can be overridden by the options with the same names in the SP or - * IdP metadata. - * - * If these aren't specified here or in the metadata for the SP or IdP, then - * the 'certificate' and 'privatekey' option in the metadata will be used. - * if those aren't set, signing of metadata will fail. - */ - 'metadata.sign.privatekey' => null, - 'metadata.sign.privatekey_pass' => null, - 'metadata.sign.certificate' => null, - - - /* - * Proxy to use for retrieving URLs. - * - * Example: - * 'proxy' => 'tcp://proxy.example.com:5100' - */ - 'proxy' => null, - - /* - * Array of domains that are allowed when generating links or redirections - * to URLs. SimpleSAMLphp will use this option to determine whether to - * to consider a given URL valid or not, but you should always validate - * URLs obtained from the input on your own (i.e. ReturnTo or RelayState - * parameters obtained from the $_REQUEST array). - * - * SimpleSAMLphp will automatically add your own domain (either by checking - * it dynamically, or by using the domain defined in the 'baseurlpath' - * directive, the latter having precedence) to the list of trusted domains, - * in case this option is NOT set to NULL. In that case, you are explicitly - * telling SimpleSAMLphp to verify URLs. - * - * Set to an empty array to disallow ALL redirections or links pointing to - * an external URL other than your own domain. This is the default behaviour. - * - * Set to NULL to disable checking of URLs. DO NOT DO THIS UNLESS YOU KNOW - * WHAT YOU ARE DOING! - * - * Example: - * 'trusted.url.domains' => array('sp.example.com', 'app.example.com'), - */ - 'trusted.url.domains' => array(), - -); diff --git a/config/ldap.php b/config/ldap.php deleted file mode 100644 index 799f584..0000000 --- a/config/ldap.php +++ /dev/null @@ -1,42 +0,0 @@ - 'uid=%username%,dc=feide,dc=no,ou=feide,dc=uninett,dc=no', - 'auth.ldap.hostname' => 'ldap.uninett.no', - 'auth.ldap.attributes' => null, - 'auth.ldap.enable_tls' => true, - - /* - * Searching the DN of the user. - */ - - // Set this to TRUE to enable searching. - 'auth.ldap.search.enable' => FALSE, - - // The base DN for the search. - 'auth.ldap.search.base' => NULL, - - /* The attribute(s) to search for. - * - * This may be a single string, or an array of string. If this is an array, then any of the attributes - * in the array may match the value the user supplied as the username. - */ - 'auth.ldap.search.attributes' => NULL, - - /* The username & password the SimpleSAMLphp should bind as before searching. If this is left - * as NULL, no bind will be performed before searching. - */ - 'auth.ldap.search.username' => NULL, - 'auth.ldap.search.password' => NULL, - -); diff --git a/config/ldapmulti.php b/config/ldapmulti.php deleted file mode 100644 index ce16cde..0000000 --- a/config/ldapmulti.php +++ /dev/null @@ -1,31 +0,0 @@ - array( - 'description' => 'Feide', - // for a description of options see equivalent options in ldap.php starting with auth.ldap. - 'dnpattern' => 'uid=%username%,dc=feide,dc=no,ou=feide,dc=uninett,dc=no', - 'hostname' => 'ldap.uninett.no', - 'attributes' => NULL, - 'enable_tls' => TRUE, - 'search.enable' => FALSE, - 'search.base' => NULL, - 'search.attributes' => NULL, - 'search.username' => NULL, - 'search.password' => NULL, - ), - - 'uninett.no' => array( - 'description' => 'UNINETT', - 'dnpattern' => 'uid=%username%,ou=people,dc=uninett,dc=no', - 'hostname' => 'ldap.uninett.no', - 'attributes' => NULL, - ) - -); diff --git a/config/translation.php b/config/translation.php deleted file mode 100644 index 8149aac..0000000 --- a/config/translation.php +++ /dev/null @@ -1,14 +0,0 @@ - 'simplesamlphp', - 'baseurl' => 'https://translation.rnd.feide.no/simplesaml', - 'key' => '_e7224d54cda84434e25ef087e5c22c1fa5f6ae87cc', - 'secret' => '_0e29f782d295bc9782112981f654f1db58174d19d7', - -); diff --git a/metadata/.gitkeep b/metadata/.gitkeep deleted file mode 100644 index e69de29..0000000 diff --git a/metadata/adfs-idp-hosted.php b/metadata/adfs-idp-hosted.php deleted file mode 100644 index cace17d..0000000 --- a/metadata/adfs-idp-hosted.php +++ /dev/null @@ -1,12 +0,0 @@ - '__DEFAULT__', - 'privatekey' => 'server.pem', - 'certificate' => 'server.crt', - 'auth' => 'example-userpass', - 'authproc' => array( - // Convert LDAP names to WS-Fed Claims. - 100 => array('class' => 'core:AttributeMap', 'name2claim'), - ), -); diff --git a/metadata/adfs-sp-remote.php b/metadata/adfs-sp-remote.php deleted file mode 100644 index 8b627ee..0000000 --- a/metadata/adfs-sp-remote.php +++ /dev/null @@ -1,12 +0,0 @@ - 'https://localhost/adfs/ls/', - 'simplesaml.nameidattribute' => 'uid', - 'authproc' => array( - 50 => array( - 'class' => 'core:AttributeLimit', - 'cn', 'mail', 'uid', 'eduPersonAffiliation', - ), - ), -); diff --git a/metadata/saml20-idp-hosted.php b/metadata/saml20-idp-hosted.php deleted file mode 100644 index 81a2007..0000000 --- a/metadata/saml20-idp-hosted.php +++ /dev/null @@ -1,71 +0,0 @@ - '__DEFAULT__', - - // X.509 key and certificate. Relative to the cert directory. - 'privatekey' => 'server.pem', - 'certificate' => 'server.crt', - - /* - * Authentication source to use. Must be one that is configured in - * 'config/authsources.php'. - */ - 'auth' => 'example-userpass', - - /* - * WARNING: SHA-1 is disallowed starting January the 1st, 2014. - * - * Uncomment the following option to start using SHA-256 for your signatures. - * Currently, SimpleSAMLphp defaults to SHA-1, which has been deprecated since - * 2011, and will be disallowed by NIST as of 2014. Please refer to the following - * document for more information: - * - * http://csrc.nist.gov/publications/nistpubs/800-131A/sp800-131A.pdf - * - * If you are uncertain about service providers supporting SHA-256 or other - * algorithms of the SHA-2 family, you can configure it individually in the - * SP-remote metadata set for those that support it. Once you are certain that - * all your configured SPs support SHA-2, you can safely remove the configuration - * options in the SP-remote metadata set and uncomment the following option. - * - * Please refer to the IdP hosted reference for more information. - */ - //'signature.algorithm' => 'http://www.w3.org/2001/04/xmldsig-more#rsa-sha256', - - /* Uncomment the following to use the uri NameFormat on attributes. */ - /* - 'attributes.NameFormat' => 'urn:oasis:names:tc:SAML:2.0:attrname-format:uri', - 'authproc' => array( - // Convert LDAP names to oids. - 100 => array('class' => 'core:AttributeMap', 'name2oid'), - ), - */ - - /* - * Uncomment the following to specify the registration information in the - * exported metadata. Refer to: - * http://docs.oasis-open.org/security/saml/Post2.0/saml-metadata-rpi/v1.0/cs01/saml-metadata-rpi-v1.0-cs01.html - * for more information. - */ - /* - 'RegistrationInfo' => array( - 'authority' => 'urn:mace:example.org', - 'instant' => '2008-01-17T11:28:03Z', - 'policies' => array( - 'en' => 'http://example.org/policy', - 'es' => 'http://example.org/politica', - ), - ), - */ -); diff --git a/metadata/saml20-idp-remote.php b/metadata/saml20-idp-remote.php deleted file mode 100644 index de1f3a3..0000000 --- a/metadata/saml20-idp-remote.php +++ /dev/null @@ -1,24 +0,0 @@ - array( - 'en' => 'Feide OpenIdP - guest users', - 'no' => 'Feide Gjestebrukere', - ), - 'description' => 'Here you can login with your account on Feide RnD OpenID. If you do not already have an account on this identity provider, you can create a new one by following the create new account link and follow the instructions.', - - 'SingleSignOnService' => 'https://openidp.feide.no/simplesaml/saml2/idp/SSOService.php', - 'SingleLogoutService' => 'https://openidp.feide.no/simplesaml/saml2/idp/SingleLogoutService.php', - 'certFingerprint' => 'c9ed4dfb07caf13fc21e0fec1572047eb8a7a4cb' -); - diff --git a/metadata/saml20-sp-remote.php b/metadata/saml20-sp-remote.php deleted file mode 100644 index a691fcf..0000000 --- a/metadata/saml20-sp-remote.php +++ /dev/null @@ -1,27 +0,0 @@ - 'https://saml2sp.example.org/simplesaml/module.php/saml/sp/saml2-acs.php/default-sp', - 'SingleLogoutService' => 'https://saml2sp.example.org/simplesaml/module.php/saml/sp/saml2-logout.php/default-sp', -); - -/* - * This example shows an example config that works with Google Apps for education. - * What is important is that you have an attribute in your IdP that maps to the local part of the email address - * at Google Apps. In example, if your google account is foo.com, and you have a user that has an email john@foo.com, then you - * must set the simplesaml.nameidattribute to be the name of an attribute that for this user has the value of 'john'. - */ -$metadata['google.com'] = array( - 'AssertionConsumerService' => 'https://www.google.com/a/g.feide.no/acs', - 'NameIDFormat' => 'urn:oasis:names:tc:SAML:1.1:nameid-format:emailAddress', - 'simplesaml.nameidattribute' => 'uid', - 'simplesaml.attributes' => FALSE, -); diff --git a/metadata/shib13-idp-hosted.php b/metadata/shib13-idp-hosted.php deleted file mode 100644 index 7617fd6..0000000 --- a/metadata/shib13-idp-hosted.php +++ /dev/null @@ -1,26 +0,0 @@ - '__DEFAULT__', - - // X.509 key and certificate. Relative to the cert directory. - 'privatekey' => 'server.pem', - 'certificate' => 'server.crt', - - /* - * Authentication source to use. Must be one that is configured in - * 'config/authsources.php'. - */ - 'auth' => 'example-userpass', -); diff --git a/metadata/shib13-idp-remote.php b/metadata/shib13-idp-remote.php deleted file mode 100644 index 142e637..0000000 --- a/metadata/shib13-idp-remote.php +++ /dev/null @@ -1,15 +0,0 @@ - 'https://idp.example.org/shibboleth-idp/SSO', - 'certFingerprint' => 'c7279a9f28f11380509e072441e3dc55fb9ab864', -); -*/ diff --git a/metadata/shib13-sp-hosted.php b/metadata/shib13-sp-hosted.php deleted file mode 100644 index f15cc91..0000000 --- a/metadata/shib13-sp-hosted.php +++ /dev/null @@ -1,13 +0,0 @@ - '__DEFAULT__', -); diff --git a/metadata/shib13-sp-remote.php b/metadata/shib13-sp-remote.php deleted file mode 100644 index 5d0f310..0000000 --- a/metadata/shib13-sp-remote.php +++ /dev/null @@ -1,16 +0,0 @@ - 'http://sp.shiblab.feide.no/Shibboleth.sso/SAML/POST', - 'audience' => 'urn:mace:feide:shiblab', - 'base64attributes' => FALSE, -); - diff --git a/metadata/wsfed-idp-remote.php b/metadata/wsfed-idp-remote.php deleted file mode 100644 index 215fb0c..0000000 --- a/metadata/wsfed-idp-remote.php +++ /dev/null @@ -1,9 +0,0 @@ - 'https://localhost:9031/idp/prp.wsf', - 'certificate' => 'pingfed-localhost.pem', -); diff --git a/metadata/wsfed-sp-hosted.php b/metadata/wsfed-sp-hosted.php deleted file mode 100644 index 3a68b7a..0000000 --- a/metadata/wsfed-sp-hosted.php +++ /dev/null @@ -1,11 +0,0 @@ - '__DEFAULT__', -);