diff --git a/README.txt b/README.txt
index 9c17a7c..65a9fd4 100644
--- a/README.txt
+++ b/README.txt
@@ -1,12 +1,19 @@
-SECURITY WARNING
-----------------
-This filter is powerful, therefore it should be granted to trusted users only.
-If you allow this filter to untrusted users, then you have to make sure that
-EVERY VIEW EVERY DISPLAY (default display also!) has correct views access
-settings.
+CONTENTS OF THIS FILE
+---------------------
+   
+ * Introduction
+ * Security Warning
+ * Requirements
+ * Installation
+ * Configuration
+ * How to find a display id 
+ * Performance
+ * Maintainers
+
+
+INTRODUCTION
+------------
 
-OVERVIEW
---------
 Insert view filter allows to embed views using tags. The tag syntax is
 relatively simple: [view:name=display=args]. The parameters are: view name, view
 display id, view arguments. For example [view:tracker=page=1] says, embed a view
@@ -21,6 +28,40 @@ Valid examples:
 [view:my_view=my_display=arg1/arg2/arg3]
 [view:my_view==arg1/arg2/arg3]
 
+
+SECURITY WARNING
+----------------
+This filter is powerful, therefore it should be granted to trusted users only.
+If you allow this filter to untrusted users, then you have to make sure that
+EVERY VIEW EVERY DISPLAY (default display also!) has correct views access
+settings.
+
+
+REQUIREMENTS
+------------
+
+This project requires the following projects:
+
+ * Views (https://www.drupal.org/project/views)
+
+
+INSTALLATION
+------------
+
+Install as you would normally install a contributed Drupal. See:
+https://drupal.org/documentation/install/modules-themes/modules-7 for further
+information.
+
+
+CONFIGURATION
+-------------
+
+ * Once Insert view is installed, visit the the input formats page at
+/admin/settings/filters and click the "configure" link for the input format(s)
+for which you wish to enable the Insert view filter. Then simply check the
+checkbox for the filter.
+
+
 HOW TO FIND A DISPLAY ID
 ------------------------
 On the edit page for the view in question, you'll find a list of displays at the
@@ -28,20 +69,9 @@ left side of the control area. "Defaults" will be at the top of that list. Hover
 your mouse pointer over the name of the display you want to use. A URL will
 appear in the status bar of your browser.  This is usually at the bottom of the
 window, in the chrome. Everything after #views-tab- is the display ID. For
-example in
-admin/build/views/edit/tracker?destination=node%2F51#views-tab-page
+example in admin/build/views/edit/tracker?destination=node%2F51#views-tab-page
 the display ID would be "page".
 
-INSTALLATION
-------------
-Extract and save the insert_view folder in your site's modules folder and enable
-it at admin/build/modules. Obviously, it requires the Views module to do its
-magic.
-
-Once Insert view is installed, visit the the input formats page at
-/admin/settings/filters and click the "configure" link for the input format(s)
-for which you wish to enable the Insert view filter. Then simply check the
-checkbox for the filter.
 
 PERFORMANCE
 -----------
@@ -49,3 +79,13 @@ To display views correctly, Insert view turns off caching for the input formats
 for which it is enabled. That means every node using this input format will not
 be cacheable. This can impact site performance. In these cases, it is
 recommended to create a special input format for use when inserting views.
+
+
+MAINTAINERS
+-----------
+
+Current maintainers:
+ * andrew morton (drewish) - https://www.drupal.org/user/34869
+ * Renato Gonçalves (RenatoG) - https://www.drupal.org/user/3326031 
+ * Adam Balsam (balsama) - https://www.drupal.org/user/223087
+ * Michael Samuelson (mlsamuelson) - https://www.drupal.org/user/47411
